迅雷在线

迅雷在线Tricks and Tips for electronics an computer.......!

迅雷在线facebookgoogle pluslinkedinrss feedemail

Monday, 12 March 2018

CYBER GHOST VPN FOR FREE



HI FRIENDS TODAY I WILL SHOW YOU HOW TO USE CYBER GHOST VPN FOR FREE AND LIFIE TIMEthis is for educational purposes only ,



download Link : click

Sunday, 13 September 2015

Hidden Secret Service Menu Codes for Sony, Samsung, LG and Philips TV

All digital TVs contain a secret service menu/mode which allows you to change various internal settings such as picture height, width, position, colors, blue back screen, etc. This secret service menu also allows you to enable or disable lots of features in your television set. Basically this service menu is used by TV mechanics.

Today in this topic, we are going to share codes to access the hidden secret service menu/mode inSony, Samsung, LG and Philips TV. These codes will work in all types of TV such as CRT, LCD, LED, Plasma, etc.
NOTE 1: Please note down the default values before changing them, so that you can restore them in future if something goes wrong or you don't like the output.
NOTE 2: Be very careful while playing with these service menus. Better to make changes and check their effects first. Don't save the changes immediately. If something goes wrong, just switch off the TV and switch on it again, it'll restore default settings.
Service Menu Code For Sony TV:
First power off your TV using the remote, then press following buttons quickly on your TV remote:
Display (or i+) + 5 + Volume Up + Power
It'll show the hidden service menu on your TV screen.
Sony_TV_Remote_Service_Code.png
Once you enter into service menu, you can press Menu (or Options) button again on your remote to switch between various service modes such as Digital, Chassis and VPC.
To navigate between available options press 1 or 4 buttons. To change or modify their values press 3 or 6 buttons.
To save your changes, just press Mute + 0 (or Enter) buttons on the remote.
To restore settings to factory defaults, press 8 + 0 (or Enter) buttons.
PS: For some new models the above mentioned method might not work. You can try following key sequence to access service menu in those new models:
While TV is on, press Left + Right + Mute + Center button + Mute + Menu buttons.
NOTE: You can also press Display (or i+) + 5 + Volume Down + Power buttons on your remote to enter in Self Check mode. This mode shows the total usage hours of your Sony TV set.
Service Menu Code For Samsung TV:
There are many codes available for accessing service menu in various Samsung TV models. You can try following codes one by one until you get access to service menu:
First power off your TV using the remote, then press following buttons quickly on the remote:
Mute + 1 + 8 + 2 + Power
Display/Info + Menu + Mute + Power
Display/Info + P.STD + Mute + Power
P.STD + Help + Sleep + Power
P.STD + Menu + Sleep + Power
Sleep + P.STD + Mute + Power
You can press Channel Up/Down buttons to navigate between available options. To change their values, press Volume Up/Down buttons.
Service Menu Code For LG TV:
Press and hold <OK> buttons on remote as well as TV panel for a few seconds and the service menu will appear on your TV screen.
LG_TV_Remote_Service_Code.png
For some TV models, you might need to press "Menu" buttons on remote and TV panel simultaneously for a few seconds to access the service menu. In a few TV models, both methods work and they open different service menus.
If the service menu asks for a password, enter 0000 (four zero). If 0000 doesn't work for you, try7777 or 0413 or 8741 or 8743 or 8878.
Now you can make changes to your desired settings.
To save the changes press <OK> button on the remote.
BONUS TIPS:
1. With the help of this secret service menu in LG TV, you can enable USB drive use by settingsUSB option to 1. Once you enable this feature, you can insert any USB drive in USB slot present at the backside of your LG TV and your TV will automatically detect it and you'll be able to play audio or video files present in your USB drive on your TV set. You can also view images present in your USB drive on your TV set.
2. You can also enable Golden Eye feature by settings Eye option to 1 in service menu. This feature automatically adjusts contrast and brightness levels of your TV set according to the lights available in your room.
3. All LG TV come with a secret feature called "Hotel Mode". You can enable this feature by settings Hotel option to 1 using service menu. Once you enable this feature, the Setup orChannel Search option will get disabled in your TV Settings. Thus no other person will be able to scan channels or fine tune channels. That's why this option is called Hotel Mode.
Updating LG TV Firmware
If you want to update your LG TV firmware/software, you can follow following simple steps:
1. First of all you'll need to download the required firmware files from official LG TV website. Just go to LG TV website and search for your TV model. You'll find the firmware files (*.epk) on your TV model page. Download it and save on your computer.
2. Now attach a USB drive in your computer and create a new folder LG_DTV in USB drive.
3. Copy the .epk file in LG_DTV folder.
4. Now insert the USB drive in your LG TV and do as following:
Press Home/Menu button on your TV remote, it'll open the Settings screen. Move the cursor toOPTION but don't press OK button. Now press 7 number button 7 times on the remote and it'll open the firmware update screen.
If pressing 7 number button 7 times doesn't work for you. Press Fav button 7 times.
To restore default firmware, follow the same instructions but press 9 number button 7 times.
Service Menu Code For Philips TV:
There are many codes available for accessing service menu in various Philips TV models. You can try following codes one by one until you get access to service menu:
0 + 6 + 2 + 5 + 9 + 6 + Menu/Info/Status
0 + 6 + 2 + 5 + 9 + 7 + Menu/Info/Status
0 + 6 + 1 + 5 + 9 + 6 + Menu
0 + 6 + 1 + 5 + 9 + 7 + Menu
1 + 6 + 2 + 5 + 9 + 6 + Menu/Status
1 + 2 + 3 + 6 + 5 + 4
If you have a different brand TV set such as Panasonic, Toshiba, Videocon, Onida, Sansui, Sharp, Akai, etc, feel free to ask us for the secret code to access its service menu..

Thursday, 1 January 2015

Samsung Galaxy Secret Code

 

 *#06# (Display IMEI number)

*#1234# (Display current firmware)
*#*#4636#*#* (Diagnostic and general settings mode)
*#*#7780#*#* (Factory soft reset)
or *#7780#

*2767*3855# (Factory hard reset to ROM firmware default settings)
*2767*4387264636# (To display product code)
*#272*imei#* (Display/change CSC code)
or *#272*HHMM#*

*#*#1472365#*#* (GPS test settings)
*#*#197328640#*#* (Service mode main menu)
*#12580*369# (SW & HW Info)
*#232337# (Bluetooth Address)
*#232331# (Bluetooth Test Mode)
*#232338# (WLAN MAC Address)
*#0228# (ADC Reading)
*#32489# (Ciphering Info)
*#2263# (RF Band Selection)
*#9090# (Diagnostic ConfiguratioN)
*#7284# (USB I2C Mode Control)
*#232339# (WLAN Test Mode)
*#0842# (Vibra Motor Test Mode)
*#0782# (Real Time Clock Test)
*#0673# (Audio Test Mode)
*#0*# (General Test Mode)
*#872564# (USB Logging Control)
*#4238378# (GCF Configuration)
*#0283# (Audio Loopback Control)
*#1575# (GPS Control Menu)
*#3214789650# (LBS Test Mode)
*#745# (RIL Dump Menu)
*#03# (NAND Flash S/N)
*#0589# (Light Sensor Test Mode)
*#0588# (Proximity Sensor Test Mode)
*#273283*255*3282*# (Data Create Menu)
*#34971539# (Camera Firmware Update)
*#526# (WLAN Engineering Mode)
*#746# (Debug Dump Menu)
*#9900# (System Dump Mode)
*#44336# (Sofware Version Info)
*#273283*255*663282*# (Data Create SD Card)
*#3282*727336*# (Data Usage Status)
*#7594# (Remap Shutdown to End Call TSK)
*#0289# (Melody Test Mode)
*#2663# (TSP / TSK firmware update)
*#528# (WLAN Engineering Mode)
*#7412365# (Camera Firmware Menu)
or *#*#34971539#*#*

*#80# (Unknown)
*#07# (Test History)
*#3214789# (GCF Mode Status)
*#272886# (Auto Answer Selection)
*#8736364# (OTA Update Menu)
*#301279# (HSDPA/HSUPA Control Menu)
*#7353# (Quick Test Menu)
*2767*4387264636# (Sellout SMS / PCODE view)
*#7465625# (View Phone Lock Status)
*7465625*782*# (Configure Network Lock NSP)
*7465625*27*# (Insert Network Lock Keycode NSP/CP)
#7465625*27*# (Insert Content Provider Keycode)
#7465625*782*# (Insert Partitial Network Lock Keycode)
*7465625*77*# (Insert Network Lock Keycode SP)
#7465625*77*# (Insert Operator Lock Keycode)
*7465625*638*# (Configure Network Lock MCC/MNC)
#7465625*638*# (Insert Network Lock Keycode)

Wednesday, 22 October 2014

PIC12F675 Memory Calibrating DATA

LAST VALID 0x3440 ( retlw  0x40)

Flash Led Project PIC 12F675


;----------------------------------------------------------------------
; NAME: Flash Led for     PIC 12F675
; BY:     Arun.s 
; WEB:  http://www.3gesoft.blogspot.com
;----------------------------------------------------------------------


; config. GPIO xx543210 = xx00 1100

; vers 0.1    25.03.2006

    list      p=12f675            ; list directive to define processor
    #include <p12f675.inc>        ; processor specific variable definitions

;----------------------------------------------------------------------
; Configurare
    __CONFIG _INTRC_OSC_NOCLKOUT & _WDT_OFF & _PWRTE_ON & _MCLRE_OFF & _CP_OFF & _CPD_OFF
    ERRORLEVEL -302
;----------------------------------------------------------------------

;----------------------------------------------------------------------
; Constant define
;----------------------------------------------------------------------
#define Led4        GPIO,0        ; (o) led yellow / gelb / galben
#define Led3        GPIO,1        ; (o) led red / rot / rosu

#define rezerva        GPIO,2        ; (i) not connected

#define swNext        GPIO,3        ; (i) intrare switch next ( not implemented )
#define    Led2        GPIO,4        ; (o) led red / rot / rosu
#define    Led1        GPIO,5        ; (o) led yellow / gelb / galben

;----------------------------------------------------------------------
; RAM VARIABLES DEFINITIONS
;----------------------------------------------------------------------
; Bank0 = 20h-5Fh

    CBLOCK    0x020
; -------------------
; delays
    delayCnt:  1    ; contor delay 100uS
    delayCnt1: 1    ; contor delay 10mS
    delayCnt2: 1    ; contor delay 1S
; -------------------
; alte variabile ..
    cntFlash: 1        ; contor flash

    ENDC

;----------------------------------------------------------------------
; MACRO DEFINITIONS
;----------------------------------------------------------------------
; Selects register bank 0
BANK0 MACRO
    BCF    STATUS,RP0    ; clear bank select bits
    ENDM
;----------------------------------------------------------------------
; Selects register bank 1
BANK1 MACRO
    BSF    STATUS,RP0    ;
    ENDM

;----------------------------------------------------------------------
; disable global irq
DISABLE_IRQ MACRO
    LOCAL STOP_INT
STOP_INT
    BCF    INTCON,GIE    ; Disable global interrupt
    BTFSC INTCON,GIE    ; check if disabled
    GOTO STOP_INT        ; nope, try again
    ENDM
;----------------------------------------------------------------------
; enable global irq
ENABLE_IRQ MACRO
    LOCAL    START_INT
START_INT   
    BSF    INTCON,GIE    ; Enable global interrupt
    BTFSS INTCON,GIE    ; check if disabled
    GOTO START_INT        ; nope, try again
    ENDM

;----------------------------------------------------------------------
; macro definitions / comands / comenzi ..

Led1_ON MACRO
    bsf Led1
    nop
    ENDM

Led1_OFF MACRO
    bcf Led1
    nop
    ENDM


Led2_ON MACRO
    bsf Led2
    nop
    ENDM

Led2_OFF MACRO
    bcf Led2
    nop
    ENDM


Led3_ON MACRO
    bsf Led3
    nop
    ENDM

Led3_OFF MACRO
    bcf Led3
    nop
    ENDM

Led4_ON MACRO
    bsf Led4
    nop
    ENDM

Led4_OFF MACRO
    bcf Led4
    nop
    ENDM
;----------------------------------------------------------------------
; END macro definitions
;----------------------------------------------------------------------


;**********************************************************************
;  PROGRAMUL
;**********************************************************************
    ORG     0x000               ; processor reset vector
    goto    MAIN                ; go to beginning of program

;-----------------------------------------------------------------------------
;    Interrupt service routine
;-----------------------------------------------------------------------------
    ORG     0x004              ; interrupt vector location
    RETFIE                ; return from interrupt

;-----------------------------------------------------------------------------
;     MAIN ROUTINE START HERE
;-----------------------------------------------------------------------------
    ORG     0x010
MAIN:
;-----------------------------------------------------------------------------
; Init_Prog
;  - Initialize program & setups
;  - Initilaize all ports to known state before setup routines are called
;-----------------------------------------------------------------------------
Init_Prog:
; int osc calibration / Calibrarea oscilatorului intern de 4 Mhz
    BANK1
    call    0x3FF        ; get the calibration value
    movwf     OSCCAL
    BANK0
; disable irqs / dezactivare intreruperi
    DISABLE_IRQ
; ports init / initializare porturi
    call Init_Ports
; leds off / initializari leduri
    call Init_Led
; init.end / ok, la munca!

;-----------------------------------------------------------------------------
; Program loop start here (forever_loop)
;-----------------------------------------------------------------------------
Prog_Loop:
    ; back to BANK0 / revin la Bank-ul 0
    BANK0

    movlw 0x05
    movwf cntFlash

flash1        ; flash mode 1
    Led1_ON
    call Delay_100mS
    Led1_OFF
    call Delay_100mS

    Led2_ON
    call Delay_100mS
    Led2_OFF
    call Delay_100mS

    Led3_ON
    call Delay_100mS
    Led3_OFF
    call Delay_100mS

    Led4_ON
    call Delay_100mS
    Led4_OFF
    call Delay_100mS


    Led4_ON
    call Delay_100mS
    Led4_OFF
    call Delay_100mS


    Led3_ON
    call Delay_100mS
    Led3_OFF
    call Delay_100mS


    Led2_ON
    call Delay_100mS
    Led2_OFF
    call Delay_100mS


    Led1_ON
    call Delay_100mS
    Led1_OFF
    call Delay_100mS

    decfsz cntFlash, f
    goto flash1
; end 1

    call Init_Led
    call Delay_100mS
   
    movlw 0x10
    movwf cntFlash
flash2         ; flash mode 2
    Led1_ON
    Led4_ON
    call Delay_100mS

    Led1_OFF
    Led4_OFF
    call Delay_10mS
   
    Led1_ON
    Led4_ON
    call Delay_100mS

    Led1_OFF
    Led4_OFF
    call Delay_10mS
    call Delay_10mS


    Led2_ON
    Led3_ON
    call Delay_100mS

    Led2_OFF
    Led3_OFF
    call Delay_10mS
   
    Led2_ON
    Led3_ON
    call Delay_100mS

    Led2_OFF
    Led3_OFF
    call Delay_10mS
    call Delay_10mS

    decfsz cntFlash, f
    goto flash2
; end 2


    call Init_Led
    call Delay_100mS
   
    movlw 0x10
    movwf cntFlash

flash3    ; flash mode 3
    Led1_ON
    Led3_ON
    call Delay_100mS

    Led1_OFF
    Led3_OFF
    call Delay_10mS
   
    Led1_ON
    Led3_ON
    call Delay_100mS

    Led1_OFF
    Led3_OFF
    call Delay_10mS
    call Delay_10mS


    Led2_ON
    Led4_ON
    call Delay_100mS

    Led2_OFF
    Led4_OFF
    call Delay_10mS
   
    Led2_ON
    Led4_ON
    call Delay_100mS

    Led2_OFF
    Led4_OFF
    call Delay_10mS
    call Delay_10mS

    decfsz cntFlash, f
    goto flash3
; end 3

    goto Prog_Loop

;-----------------------------------------------------------------------------
; Library / PROCEDURI
;-----------------------------------------------------------------------------

;-----------------------------------------------------------------------------
; Delay 1S
;-----------------------------------------------------------------------------
Delay_1S:                    ; Call = 2 cycles
    movlw    d'100'                ; 1 cycles
    movwf    delayCnt2            ; 1 cycles
Delay_1S_1:
    call    Delay_10mS            ; 2 cycles
    decfsz    delayCnt2,f            ;
    goto    Delay_1S_1            ; 1+2 cycles
    return

;-----------------------------------------------------------------------------
; Delay 100 mS
;-----------------------------------------------------------------------------
Delay_100mS:                    ; Call = 2 cycles
    movlw    d'10'                ; 1 cycles
    movwf    delayCnt2            ; 1 cycles
Delay_100mS_1:
    call    Delay_10mS            ; 2 cycles
    decfsz    delayCnt2,f            ;
    goto    Delay_100mS_1            ; 1+2 cycles
    return

;-----------------------------------------------------------------------------
; Delay 10 mS
;-----------------------------------------------------------------------------
Delay_10mS:                        ; Call = 2 cycles
    movlw    d'100'                ; 1 cycles
    movwf    delayCnt1            ; 1 cycles
Delay_10mS_1:
    call    Delay_100uS            ; 2 cycles
    decfsz    delayCnt1,f            ;
    goto    Delay_10mS_1        ; 1+2 cycles
    return

;-----------------------------------------------------------------------------
; Delay 100 uS = (5+(3*Constant))*OSC/4
;-----------------------------------------------------------------------------
Delay_100uS:                    ; Call = 2 cycles
    movlw    d'31'                ; 1 cycle
    movwf    delayCnt            ; 1 cycle
    decfsz    delayCnt,f            ;
    goto    $-1                    ; 1+2 cycles
    return                        ; 2 cycles

;-----------------------------------------------------------------------------
; Port init / Initialize Port
;-----------------------------------------------------------------------------
Init_Ports:
    BANK0                ; Bank 0
    clrf    GPIO            ; 1)Status of pins:  GPIO (GPIO=0 <ViL, =1 >ViH)
    movlw    b'00000111'        ; 2)Comparator configuration
    movwf    CMCON            ; Set GP<2:0> digital IO (comparator Off)
    BANK1                ; Bank 1
    bcf     OPTION_REG,5        ; 3)TMR0 clock source select:  Internal instruction cycle clock (CLKOUT)
    bsf    OPTION_REG,7        ; 4)GPIO pull-ups: is disabled
    clrf    WPU            ; 5)Clear weak pull-up register
    clrf    IOC            ; 6)Clear Interrupt-on-change register

;-----------------------------------------------------------------------------
; Port setup GP0-GP5
;-----------------------------------------------------------------------------
;GP0 (Led Y)        act as output
;GP1 (Led R)        act as output (eventual rezerva)
;GP2 (NC)            act as input - rezerva
;GP3 (switch)        can be input only
;GP4 (Led R)        act as output
;GP5 (Led Y)        act as output
;-----------------------------------------------------------------------------

    movlw   b'00001100'        ; 7) data direction TRISO 0: output, 1: input (Hi-Z mode)
    movwf   TRISIO             ; {0,0,GPIO<5:0>} 0-Output 1-Input
; * 12F675 Only *            ; initializaz registrul de selectare a intrarilor analogice
    clrf ANSEL                ; 8)* xxxx ANS<3..0> =0 digital I/O, =1 analog input   
    ;
    BANK0
    return
;-----------------------------------------------------------------------------

;-----------------------------------------------------------------------------
; Initialize Leduri
;-----------------------------------------------------------------------------
Init_Led:
    Led1_OFF
    Led2_OFF
    Led3_OFF
    Led4_OFF
    return
;-----------------------------------------------------------------------------
; calibrarea oscilator intern
;-----------------------------------------------------------------------------
    org 3FFh
; [34]9Ch for  pic 12F675
    retlw 0x9C    ;
;-----------------------------------------------------------------------------
    END                    ; directive 'end of program'
;-----------------------------------------------------------------------------

Saturday, 15 March 2014

All secret codes for android mobile phones

1. *#*#4636#*#* - About phone.

2. *#*#7780#*#* - Restore factory.

3. *2767*3855# - Reinstalls phones firmware.

4. *#*#34971539#*#* - About camera.

5. *#*#7594#*#* - Changing the power button behavior enables direct power off.

6. *#*#273283*255*663282*#*#* - Backup media files.

7. *#*#197328640#*#* - Test mode for service activity.

8. *#*#232339#*#* -  Wireless lan test.

9. *#*#232338#*#* - Displays Wi-Fi mac address.

10. *#*#1472365#*#* - GPS test.

11. *#*#1575#*#* - Different GPS test.

12. *#*#0283#*#* - Packet loop back test.

13. *#*#0*#*#* - LCD display test.

14. *#*#0673#*#* - Audio test.

15. *#*#0842#*#* - Vibration and backlight test.

16. *#*#2663#*#* - Displays touch screen test.

17. *#*#0588#*#* - Proximity sensor test.

19. *#*#232331#*#* - Bluetooth test.

20. *#*#7262626#*#* - Field test.

21. *#*#232337#*#* - Displays bluetooth device address.

22. *#*#8255#*#* - G-talk monitoring.

23. *#*#4986*2650468#*#* - PDA, hardware, phone, RF call date firmware info.

24. *#*#1234#*#* - PDA and phone firmware info.

25. *#*#1111#*#* - FTA software version.

26. *#*#44336#*#* - Displays build time and change list number.

27. *#06# - IMEI - Number.

28. *#*#8351#*#* - Enable voice dialing logging mode.

29. *#*#8350#*#* - Disable voice dialing logging mode.

30. **05***# - Execute from emergency dial screen to unlock PUK code.